Miraclon has received the prestigious FTA Technical Innovation Award for PureFlexo Printing. Accessed through KODAK FLEXCEL NX Print Suite, the technology addresses and controls unwanted ink spread to allow a wider operating window in printing – maximizing efficiency, repeatability and overall performance on press. As one of only three Technical Innovation Award recipients, and the only recipient in the Prepress Graphics Category, it underscores the significant impact that PureFlexo Printing can make – and has already been making – in driving increased uptime for converters.

PureFlexo Printing utilizes Miraclon’s patented advanced plate surface patterning technology to resist the tendency of ink to spread during printing. Available only on the FLEXCEL NX System and focused primarily on printing with solvent inks on film, it brings a wider operational window regardless of line screen, with compound savings from fewer unscheduled press stops each day, reduced downtime and delays, and faster color setups.

Joe Tuccitto, Director of Education at FTA, said: “Recipients of the FTA Technical Innovation Award are chosen by a panel of flexographic experts for having the potential to positively change the future of flexography. Once again this year, the judging process was extremely competitive with a wide variety of innovative technologies that utilize the flexographic process or have been designed specifically to enhance flexographic printing. Miraclon should be very proud of this outstanding achievement; at a time where businesses are taking an extra hard look at maximizing efficiency and minimizing costs, PureFlexo Printing proves to be an innovation that can make a real impact across the whole production process.”

The award – the third FTA Innovation Award for technology from Miraclon – was presented this past weekend during the Annual Awards Banquet at FORUM 2023 in Columbus, Ohio, United States. In 2009, shortly after its commercial introduction, the FTA recognized the KODAK FLEXCEL NX System with a Technical Innovation Award which, as predicted by the judging panel, helped to change the capabilities of the modern flexo process over the last 15 years. Miraclon received the second FTA Innovation Award for the KODAK FLEXCEL NX Ultra Solution featuring Ultra Clean Technology – another confirmation of Miraclon’s commitment to backwards-compatible, ongoing value-driven innovation for FLEXCEL NX customers – in 2020.

“We’re honored to receive this FTA Technical Innovation Award, which signifies the importance of innovations that can have a big impact across the flexo value chain,” comments Reid Chesterfield, Chief Technology & Innovation Officer at Miraclon. “PureFlexo Printing is being utilized to streamline efficiency and addresses the root cause of issues that result in unscheduled press stops and impact customers’ financial bottom line. The proven productivity benefits it brings to the print production process should be an important consideration for flexo trade shops and converters.”

About Miraclon

Miraclon is the home of KODAK FLEXCEL Solutions, which have helped transform flexographic printing for more than a decade. The technology, including the industry-leading FLEXCEL NX and FLEXCEL NX Ultra Systems, and FLEXCEL NX Print Suite that enables PureFlexo™ Printing, maximizes on-press efficiency, delivers higher quality and overall best-in-class results. With a focus on pioneering image science, innovation, and collaboration with industry partners and customers, Miraclon is committed to the future of flexo and continues to be positioned to lead the charge. Find out more at www.miraclon.com, and follow us on LinkedIn and YouTube.

Tarsus Group, organizer of the Labelexpo Global Series, has announced the opening of registration for Labelexpo Europe 2023. The show takes place between 11-14 September at Brussels Expo. 

This will be the first Labelexpo show in Europe since 2019. Along with demonstrations of the latest printing and converting equipment will be masterclasses and special events focused on Automation and Flexible Packaging.

Tickets to the show cost Euro 95, with an early registration rate of Euro 75 until 25th August at 18.00 CET.

New equipment to be seen at Labelexpo Europe includes the world premiere of the HP Indigo 200K press, the Xeikon CX500t Titon toner press and the Screen Truepress PAC520P water-based packaging press. 

Commented Jade Grace, portfolio director of Labelexpo Global Series, “We are delighted to be running Labelexpo Europe again, and can promise visitors an extraordinary show across nine halls. We will see an explosion of cutting-edge technology launched at the show, everything from pre-press to materials, and digital and conventional print and converting technology. Add to this a world-leading series of educational events and our focus on Automation and Flexible Packaging for label converters and you have an unmissable Labelexpo experience.”

Added Andy Thomas-Emans, strategic director at Labelexpo Global Series , “We are already seeing key technology themes emerging at Labelexpo Europe 2023. Diversification across labels and flexible packaging technologies, digital embellishment, workflow and machine automation, real-time data collection over the Cloud and sustainability across multiple fronts from LED-UV to more new materials and adhesives choices. This will be a landmark show for the future direction of our industry.”

For further information about Labelexpo, please contact:

Paul Connelly, marketing director, Labelexpo Global Series.

Email: pconnelly@labelexpo.com

For more information about Labelexpo Global Series, follow Labelexpo on Twitter at @Labelexpo or visit the Labelexpo Europe website.

This email was sent to: @EMAIL@. Unsubscribe or amend details
This email is from Tarsus Group Limited, 2000544 registered in England and Wales.
Metro Building, 1 Butterwick, London, W6 8DL, United Kingdom

Irvine, Calif., April 13, 2023 – Wide-format imaging leader Roland DGA has announced the launch of its new Roland DG Care PLUS extended warranty program for TrueVIS™ printers, which offers customers the opportunity to purchase extended coverage at a significant discount when buying or leasing a new Roland DG TrueVIS printer or printer/cutter. With Roland DGA Care PLUS, customers can extend their warranty coverage beyond Roland DGA’s already industry-best Two-Year Trouble-Free Warranty to include one or two additional years – for up to four years of total warranty coverage – at a significant savings.

 Those who buy or lease a new TrueVIS printer can save up to $999 when purchasing warranty extensions through the new Roland DG Care PLUS plan. Leasing customers also have the option of rolling the discounted price for their third- and/or fourth year extended warranties into their monthly lease payments when bundled at the time of purchase, extending the coverage over the entire term at a minimal additional monthly cost.

Existing TrueVIS owners under warranty can take advantage of the Roland DG Care PLUS plan as well. Roland DGA is offering the same discounted pricing to current owners of TrueVIS devices who purchase their extended warranties now through June 30, 2023.

“Previously, TrueVIS customers only had the option of buying warranty extensions for their devices in one-year increments, and at a higher price,” notes Roland DGA’s Vice President of Service, Ron Ball. “Now, through the new Roland DG Care PLUS program, they can obtain up to two years of additional coverage up front and save a considerable amount of money. In addition to unsurpassed TrueVIS quality and reliability, they can get the extra peace of mind that comes with up to four years of warranty protection and pocket the savings.” 

To learn more about the new Roland DG Care PLUS extended warranty program for TrueVIS family printers and printer/cutters, visit https://www.rolanddga.com/care-plus. For more information on Roland DGA Corporation, or the complete Roland DGA product line, visit https://www.rolanddga.com.

About Roland DG Americas

Roland DG Americas serves North and South America as the marketing, sales, distribution, and service arm for Roland DG Corporation. Founded in 1981 and listed on the Tokyo Stock Exchange, Roland DG of Hamamatsu, Japan is a worldwide leader in wide-format inkjet printers for the sign, apparel, textile, personalization and vehicle graphics markets; engravers for awards, giftware and ADA signage; photo impact printers for direct part marking; and 3D printers and CNC milling machines for the dental CAD/CAM, rapid prototyping, part manufacturing and medical industries.

Lawrenceville, GA – April 12, 2023: Continuing their ever-growing presence, Vanguard Digital Printing Systems, a Durst Group Company, has announced their new partnership with Glantz, a leading supplier in the industry, based in Louisville, Kentucky. To consummate this relationship, Glantz will feature the Vanguard Digital VR6D-HS UV-LED flatbed printer on booth 3457 at ISA 2023 next week. 

Jim Peterson, COO and Founding Partner of Vanguard Digital said, “We are ecstatic to partner with the phenomenal team at Glantz, and to make them part of the growing Vanguard Digital family. It’s Glantz commitment to supporting the wide format graphics industry that really led us to developing this collaboration. We are looking forward to the future of the industry, especially alongside the trusted, nation-wide team at Glantz.”  

About the partnership, Carlos Tirado, National Equipment Sales & Service Manager said, “Adding the premium quality line of large format flatbed, roll-to-roll and hybrid UV-LED printers from Vanguard Digital Products is a natural fit for Glantz. We are excited about this new addition and partnership!” 

This partnership allows Vanguard, a manufacturer with a portfolio of wide format UV-LED printers, to unite with Glantz’s driven, expansive team to further expand the accessibility of Vanguard Digital printing solutions to Print Service Providers across the country.   

Stop by booths 4239 (Vanguard) and 3457 (Glantz) at ISA 2023 to see the innovative Vanguard Digital solutions.  

 
CONTACT:  For information on Vanguard Digital Printing Systems, A Durst Group Company, products and services, contact Becky McConnell and Sydnie Shepland  

Email: Becky.McConnell@durst-group.com, Sydnie.Shepland@durst-group.com 

Phone: (470) 326-3790 

Vanguard Digital online at: https://vanguarddigital.com 

·      NEW PRINTABLE COATED CAVITATED BRILLIANT WHITE GLOSS FILM

·      MADE FOR SELF ADHESIVE LABEL APPLICATIONS

·      COMPLIES WITH EU FOOD CONTACT REGULATIONS

Combining the best of both worlds: Innovia Films has recently applied their surface technology to their material science, by developing a uniquely engineered printable coated cavitated BOPP facestock film, Rayoface™ AQBSA.  Designed for pressure sensitive labelling (PSL) applications, the film is 58 microns thick, has a printable top-coating, and an adhesive receptive coated surface on the reverse side.  

“AQBSA is suitable for use within a wide range of market segments such as Household and Personal Care, Food and Beverage, and other consumer packaged goods sectors”, explains Lucija Kralj, Business Unit Director Labels. “The 5-layer technology in the cavitated base film, means AQBSA is a high-performance product that gives both superb economics and a high yield.”

With an extremely high opacity of 91%, Rayoface™ AQBSA provides a brilliant white surface, and even after top-coatings, has EU food contact compliance.

The enhanced coating technology of Innovia Films means AQBSA provides the off-press ink adhesion label printing requires, as well as the print and cold-foiling appearance the PSL market demands. 

This film has already undergone in-depth trialling and shown excellent results throughout the PSL supply chain and is available immediately.

To find out more contact your local Innovia Films Sales Manager or email labels@innoviafilms.com

For further information contact:

Marika Knorr, Head of Sustainability & Communications / Charlotte Robinson, Assistant Communications Manager

Innovia Films Ltd, Lowther R&D Centre, Wigton, Cumbria, CA7 9XX, UK

Tel: +44 (0) 16973 42281   Fax: +44 (0) 16973 41452 

Email: mknorr@cclind.com

www.linkedin.com/company/innovia-films

Watch our Videos on You Tube: www.youtube.com/innoviafilms

www.innoviafilms.com

Innovia Films is a major producer of highly differentiated specialty Biaxially Oriented Polypropylene (BOPP) films using proprietary ‘Bubble’, Stenter Technology and Cast manufacturing processes. 

The company holds a leading global position in the markets for high performance coated films, tobacco overwrap, labels and security films. Innovia employs >1400 people worldwide and has production sites in Australia, Belgium, Germany, Mexico, Poland and the UK. The company is focused on high-quality value-added products, strong customer relationship, R&D and excellent service.

UPM Raflatac is expanding its wash-off portfolio with new paper label materials that enhance the recycling of PET and HDPE. The label materials have received European certifications of recyclability from Institut cyclos-HTP for PET and HDPE packaging, and they are part of UPM Raflatac’s SmartCircle™ portfolio.

“We are determined to develop solutions for circularity. While plastics have remarkable features to keep valuable content safe until consumption, we also seek ways to increase the share of certified renewable materials in the packaging that go beyond fossils. Now, in addition to our multiple plastic wash-off solutions, we are excited to expand the offer into sustainably sourced paper labels. These innovations enable high-quality recycled PET and HDPE flakes to be used again as the label material separates cleanly in the recycling process,” says Sylwia Jurys, Vice President, Paper Laminates SBU EMEIA, UPM Raflatac.

The certifications verify that PET and HDPE bottles using the certified label materials are recyclable in the most common recycling processes. They separate cleanly from the recycled packages resulting in a greater yield of PET and HDPE. This allows the valuable PET and HDPE flakes to be recovered without contamination with the label materials. The flakes can be converted into new high-quality materials and may be used also within the closed-loop systems. This reduces waste, increases the availability of high-quality recycled raw material, and reduces the need for virgin plastic.

The recycling of plastic waste is a worldwide issue, that calls for attention from every part of the recycling value chain. The EU’s Plastic Strategy foresees that by the year 2030, all plastic packaging should be reusable or recyclable in a cost-effective manner. To achieve these ambitious goals, the packaging itself as well as the recycling value chain must be designed to ensure the recyclability of the packaging.

“The right label material choice plays a critical role in enhancing the recyclability of any packaging. With the comprehensive SmartCircle portfolio we can offer our customers materials for many different purposes, enhance packaging sustainability, and support in the shift to a circular economy,” Jurys says.

Institute cyclos-HTP is a company specialized in the classification, assessment, and certification of recyclability of packaging and goods as well as in research and development in the field.

You can find all the certificates for UPM Raflatac’s SmartCircle wash-off solutions below.

• PureCycle Coat-FSC / RWP5 (certificates 1 & 2)

• PureCycle Top-FSC / RWP5

• Rafwash White FTC 60 / RC7W

• PP White FTC 60 / RW65C

• PP Clear FTC 50 / RW65C

• PP Clear Wash FTC 50 / RW85C

• PP White Wash FTC / RW85C

• Forest PP Clear FTC 50 / RW85C

• Forest PP White FTC 60 / RW85C

For further information please contact:
Sylwia Jurys, Vice President, Paper Laminates SBU EMEIA, UPM Raflatac
Media contacts coordinated by Saku Uotila, Senior Specialist, Communications, UPM Raflatac, tel. +358 2041 50828 or saku.uotila@upm.com

Graham, NC – April 12, 2023, Fedrigoni Self-Adhesives (FSA), part of The Fedrigoni Group, a global leader in the production of premium labels and self-adhesive materials, has introduced Monet X-Dry™ Ultra WS FSC® to the North American market. Monet is an uncoated paper with natural brightness and technology that preserves initial opacity and graphics integrity and eliminates bubbles and wrinkles, even when subject to extreme temperature changes or ice buckets.

Monet features X-Dry™ a technology that is specifically designed to preserve the initial label opacity and integrity after being exposed to extreme temperature changes, making it ideal for wine and spirits, which are often placed in refrigerators and ice buckets.

The proprietary X-Dry™ technology also helps ensure the legibility of graphic design and a brand’s image. With added Ultra Wet Strength technology, this material also prevents deformation, wrinkles and bubbles from forming on the label. These two technologies, combined with the permanent acrylic adhesive, which improves adhesion to glass bottles, is an ideal solution for white, rose, and sparkling wines in addition to any premium product that requires a high-performing label in varying temperatures and humidity conditions.

According to Melissa Harton, Marketing Manager, North America, “We are pleased to be able to offer this premium wine and spirits paper here in the United States. Not only is it a highly functional material, but it also offers the perfect canvas for the elegant designs we see in the wine and spirits markets today. We are also pleased to have another FSC® certified product in our portfolio.”

Fedrigoni’s Monet X-Dry™ Ultra WS FSC® not only provides resistance to immersion in water/ice but also helps prevent creases and deformation and offers a sustainability story for brands. Monet X-Dry™ Ultra WS is FSC®certified, made from elemental chlorine-free (ECF) pulp and is acid-free.

Product Details:

●       Available to ship from the CA distribution center

●       MOQ: 12” x 10,000’ 

Products Available:

●       Monet X-Dry™ Ultra WS 110 / SH 6020 Plus / 1.2 mil PET

●       Monet X-Dry™ Ultra WS 110 / SH 9020 / 1.2 mil PET

FSC®-C138765.

About Fedrigoni

Since 1888 Fedrigoni has stood for excellence in the manufacture of specialty papers. Today, it is a world leader in labels, self-adhesive materials and high-added-value papers for luxury packaging and other creative solutions. With over 5,000 employees in 28 countries and 25,000 products, the Group sells and distributes in 132 countries and, thanks to recent acquisitions, has become the first player at a global level in specialty papers for luxury packaging and third in premium self-adhesive materials. The Paper business unit includes the Cordenons Group, the historic brand Fabriano, and most recently Guarro Casas (October 2022) and Papeterie Zuber Rieder (November 2022). The Self-Adhesives business unit includes Arconvert, Manter, Ritrama (since February 2020), IP Venus (December 2020), Acucote and Rimark (June 2021), Divipa (February 2022), Tageos (April 2022), Unifol (July 2022). Furthermore, the American distributor GPA is also part of the Group.

Irvine, Calif., April 12, 2023 – Wide-format imaging leader Roland DGA has introduced two new Rotary Rack attachments that enable the company’s recently launched VersaOBJECT® CO Series UV flatbed printers as well as VersaUV® LEC2 S-Series UV flatbeds to print directly around cylindrical objects.

Sturdy, accurate, and simple to use, the new Rotary Rack XL and Rotary Rack XXL attachments allow VersaOBJECT CO Series and VersaUV LEC2 S-Series users to perform full 360-degree printing around a wide variety of cylindrical items, including larger objects, with ease and precision. The Rotary Rack XL is designed for use with the 30-inch CO Series and LEC2 S-Series flatbed and belt-driven hybrid UV printers, while the larger Rotary Rack XXL is built for the 64-inch flatbed and belt-driven hybrid models.

Both the XL and XXL attachments can print on cylindrical items ranging from .5 inch to 7.75 inches in diameter, including angled bottles or glassware, and are capable of full cylindrical wraps. The Rotary Rack XXL is equipped with two 30-inch racks, allowing for increased versatility and production capability.

Rotary Rack XL and Rotary Rack XXL are made in the USA and feature durable aluminum construction for reliable, long-lasting performance. While both attachments are extremely strong and built to last, they are surprisingly lightweight, which makes them easy to lift, transport, and use. They are uniquely engineered to fit perfectly under the carriage of the printer and are powered completely by the gantry, allowing for cost-efficient operation. Rotary Rack setup is also a breeze – users can be ready to print in minutes.

“The new Rotary Rack attachments allow users of our CO Series and LEC2 S-Series UV flatbed printers to expand their applications and customized product offerings to include everything from drumsticks to large water bottles and more,” said Roland DGA Product Manager Kitt Jones. “In addition to being durable, reliable, and simple to operate, these innovative accessories significantly enhance the capabilities of our wide-format UV flatbeds. They add direct-printing on cylindrical objects to the long list of things these amazing machines can do.”

To learn more about the new Rotary Rack XL and XXL accessories, visit https://www.rolanddga.com/rotaryrack. For more information on Roland DGA Corporation, or the complete Roland DGA product line, visit https://www.rolanddga.com.

About Roland DG Americas

Roland DG Americas serves North and South America as the marketing, sales, distribution, and service arm for Roland DG Corporation. Founded in 1981 and listed on the Tokyo Stock Exchange, Roland DG of Hamamatsu, Japan is a worldwide leader in wide-format inkjet printers for the sign, apparel, textile, personalization and vehicle graphics markets; engravers for awards, giftware and ADA signage; photo impact printers for direct part marking; and 3D printers and CNC milling machines for the dental CAD/CAM, rapid prototyping, part manufacturing and medical industries.

Schaumburg, IL – April 12, 2023 – It has been six years since the metal decorating industry last came together at MetPack. In a world of change, one thing that hasn’t is INX International’s status as the global leader in metal decorating inks and color management technologies. Many of the major advancements INX has introduced since 2017, including the latest new products, will be exhibited in Stand 3C15 from May 2-6 in Essen, Germany.

INX will demonstrate a full range of products for 2- and 3-piece cans, monobloc containers, and direct-to-metal digital decoration and brand color management solutions. Daily presentations will be offered about Sustainable Ink Innovations and INX Color Perfection.

“The metal decorating industry has experienced rapid change since 2017. Many of our new developments have taken place in the last three years since the show was canceled due to the COVID-19 pandemic,” said Renee Schouten, INX’s Vice President of Marketing, in reference to MetPack’s three-year rotation cycle.

“We continue to ambitiously pursue new projects and developments to stay in front of future trends. Every approach we take, from resource management and sustainability to brand marketability and improved shelf appeal, is done with the brand owners, customers and consumers in mind.”

One of the major innovative contributions that has grown dramatically is INX Color Perfection. The brand and color management program includes the first ever INX Color Catalog, Together with a digitized color library, advanced digital proofing, and color management tools, brand owners are able to get their cans to market quicker with accurate and consistent color anywhere in the world.

“The market penetration of the INX Color Catalog is remarkable,” continued Schouten. “With over 330 catalogs in the marketplace, more than 50% are in the hands of brand owners and they participate in our annual Colored By INX Can Design Contest. It incorporates use of the Color Catalog, and all eligible participants, including designers, metal decorators, and others have until May 31 to enter their designs.”

Sarah Jacks, INX Color Perfection Manager, will conduct the daily INX Color Perfection – A Global Update, sessions starting at 10:30 a.m. The demonstrations will explain the worldwide acceptance of the color management program with the most recent updates and brand owner case studies.

Alex Folloso, Director of Metal Decorating Technology, will be the speaker for the Coloring a Safe and Sustainable Future in Metal Decoration presentations at 2:30 p.m. It’s an opportunity for attendees to learn about INX’s sustainable ink innovations specific to the metal decorating market, and how exclusive resources are dedicated to industry research and development.

Formulated with sustainable practices and consumer safety in mind, the EcoCan 2-piece metal ink system has gained recognition in the marketplace since being introduced in 2021. Schouten said the product receiving a Gold Level Material Health Certificate from the Cradle to CradleÔ Innovation Institute is another example of INX’s dedication to the environment and consumer safety.

“Gold certification is awarded only to products that avoid the use of chemicals of concern,” she remarked. “Our R&D division is dedicated to technological innovations and continuously upgrades our product formulations. EcoCan is a great choice for metal decorators since it is formulated with low VOC and BPA-NI for environmentally friendly printing on high-speed aluminum and coated beverage cans.”

Schouten explained that as part of the focus on PFASNI, INX has reformulated all UV curable flat sheet metal decorating inks including INXCure PrintPro EU.

Designed for flat sheet metal decorating and formulated with European food regulations in mind, INXCureÒ PrintPro EU inks are free of Per and Polyfluoroalkyl substances. For use on crowns, screw caps, closures, 2-piece DRD cans, welded aerosols and decorative tin applications, the performance-proven inks cure fast for UV or LED, with excellent fabrication and printability.

INX’s specialty inks portfolio will also be on display in Stand 3C15. AP Tactile Plus, NoVar Gloss and Matte inks, as well as thermochromic color changing, fluorescent, black light, and brand protection security inks will showcase how metal packaging can have maximum shelf appeal.

With chemists, engineers, and software experts focused on inkjet formulations and print drive electronics, INX Digital provides customer-driven solutions for direct-to-metal digital decorating. Experts will be available to talk about a wide range of digital inkjet solutions, including UV and LED inkjet and Low Migration formulations and advanced digital proofing. MetPack attendees can sign-up to meet with INX or to attend a daily presentation here.

About INX International Ink Co.

INX International Ink Co. is the third largest producer of inks in North America, with full-service subsidiaries in Europe and South America and is part of Sakata INX worldwide operations. We offer a complete line of ink and coating solutions technology for commercial, packaging and digital applications. As a leading global manufacturer of inkjet inks, we provide a full palette of digital ink systems, advanced technologies and integrated services. To stay in touch with the latest developments, follow INX on Facebook and Twitter and visit www.inxinternational.com.